服务热线:400-800-6106 官方微信 话题标签 网站地图 EN

NTEK北测检测集团

当前位置 : 首页 > 新闻资讯> 行业知识

FCC针对U-NII-3 5G设备认证测试再做调整

2019-12-26
3906 作者: 北测检测
本文关键词:
FCC认证

2016年3月2日,FCC颁布关于(U-NII)5G设备的ET Docket No. 13-49技术文件的备忘录FCC-16-24A1。该备忘录不会在发布后30天后生效,具体生效时间由FCC发布指导文件后正式执行。该备忘录对Part 15E的内容进行调整如下:


15.407 General technical requirements.

(1) For the band 5.15 – 5.25 GHz: (iv) For client devices in the 5.15-5.25 GHz band, the maximum conducted output power over the frequency band of operation shall not exceed 250 mW provided the maximum antenna gain does not exceed 6 dBi. In addition, the maximum power spectral density shall not exceed 11 dBm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi.         

(4) For transmitters operating in the 5.725-5.85 GHz band:
(i) All emissions shall be limited to a level of -27 dBm/MHz at 75 MHz or more above or below the band edge increasing linearly to 10 dBm/MHz at 25 MHz above or below the band edge, and from 25 MHz above or below the band edge increasing linearly to a level of 15.6 dBm/MHz at 5 MHz above or below the band edge, and from 5 MHz above or below the band edge increasing linearly to a level of 27 dBm/MHz at the band edge.
(ii) Devices certified before March 2, 2017 with antenna gain greater than 10 dBi may demonstrate compliance with the emission limits in Section 15.247(d), but manufacturing, marketing and importing of devices certified under this alternative must cease by March 2, 2018. Devices certified before March 2, 2018 with antenna gain of 10 dBi or less may demonstrate compliance with the emission limits in Section 15.247(d), but manufacturing, marketing and importing of devices certified under this alternative must cease before March 2, 2020.

获取报价

公司名称: *
您的姓名:*
您的手机:*
您的需求:*

*为了您 的权益,您的信息将被 严格保密

信息提交成功

专业工程师将飞快联系您,为您提供合适 解决方案,期待与您相遇~

微信公众号
分享行业干货
微信咨询
请备注咨询服务